Matrox Mura D-Series, System Builder'S Manual

Page: 17 / 88

Matrox Display Wall – System Builder’s Guide 17
Configurations
Power supply 1550 W redundant power supply (P/N: Zippy MTW4-5F50V3H)
PCIe expansion slots

10 PCIe x16 2.0 slots (x16 mechanical, x16 electrical)

1 PCIe x16 2.0 slot (x16 mechanical, x4 electrical)
Notes

The dust protection sponge filter in the front door must be removed for proper system ventilation.
 If you use a wired mesh filter in the front door, the ambient temperature must not exceed 40 degrees C. The
chassis fans must run at full speed. Filter requires a 18 x18 size 304 stainless steel wire mesh.
 Once the add-in cards are installed in the system, the baffle must be placed on the top for proper air
circulation. The baffle must be used only with small clips to properly secure the add-in cards with the board
retainer bar.

Requires 4 x 92 mm x9 2 mm x 25 mm 102 CFM chassis fans running at full speed.
 The smart fan must be disabled to run the chassis fans at full speed. In the system BIOS, go to
Advanced

HW Monitor Tab

SYSFAN1 smartfan
setting

and select
DISABLE
.
 Ensure to have the following settings for GPU. Go to the system BIOS main page

Chipset

System Agent
(SA) Configuration

Graphics Configuration

and select:

Primary Display

AUTO

Internal Graphics

AUTO
(select
Enabled
for Console)
 In the system BIOS main page, go to

Chipset

System Agent (SA) Configuration

Above 4GB MMIO BIOS
Assignment

and select
Enabled
.
 On-board console support with D-Series controller. Requires 3.05 or later drivers.

Card placement shown in the configuration table must be followed for better system ventilation.
 Any unused slots must be installed with solid brackets for proper system ventilation.

Requires a CPU 8-pin female to ATX 4-pin male power adapter to connect the power supply to the 4-pin
connector header ATX12V2 on the backplane.
Slot
D-Series based controller Third-party based controller
Main Option Main Option
PPCIEX4_1 N/A N/A N/A N/A
P1PCIEX16_1 MURAIPXI-E4JF A Third-party graphics hardware
P1PCIEX16_2 MURAIPXI-E4JF A MURAIPXI-E4JF A
P1PCIEX16_3 MURAIPXI-E4JF A MURAIPXI-E4JF A
P1PCIEX16_4 D1480 B Third-party graphics hardware A
P1PCIEX16_5 MURAIPXI-E4JF A MURAIPXI-E4JF A
P2PCIEX16_1 MURAIPXI-E4JF A Third-party graphics hardware A
P2PCIEX16_2 MURAIPXI-E4JF A MURAIPXI-E4JF A
P2PCIEX16_3 D1480 B MURAIPXI-E4JF A
P2PCIEX16_4 D1480 B Third-party graphics hardware A
P2PCIEX16_5 D1480 B MURAIPXI-E4JF A