Matrox Mura D-Series, System Builder'S Manual

Page: 60 / 88

60 Matrox Display Wall – System Builder’s Guide
ASUS WS C422 SAGE 10G
Configurations
Performance considerations with D-Series controller
D-Series based controllers Third-party based controllers
Validated Yes No foreseeable compatibility issues
Maximum number of cards
supported
7
Maximum supported
Mura IPX Series
6
Maximum supported
D-Series
4
Motherboard ASUS WS C422 SAGE/10G
Chipset Intel C422
Processor Intel® Xeon W-2123 CPU @ 3.6 GHz
Heatsink (for CPU) LGA 2066
System BIOS version 3203, 2020-06-10
System memory 32 GB DDR4 RDIMM
Chassis Chenbro RM41300-FS81
Power supply 850 W (P/N:EVGA Supernova 850G3; use with Chenbro RM41300-FS81)
PCIe expansion slots

7 PCIe x 16 3.0 slots (x16 mechanical, x16 / x8 electrical)
Notes  The chassis must be ordered from Chenbro. Power supply isn’t included with the chassis.

The chassis fans must run at full speed. To change the fan speed, go to the system BIOS main page (EZ
mode)
 select
QFan Control
 select the header to which the fans are connected  change from
Standard
to
Full Speed
and apply the changes.
 Ensure to have the following settings for Above 4G Decoding. In the system BIOS, go to
Advanced Mode

Boot
, then set
Above 4G Decoding
to
ON
and set
First VGA 4G Decode
to
Above_4G
.
Slot
D-Series based controller Third-party based controller
Main Option Main Option
PCIEX16_1 D1480 B Third-party graphics hardware
PCIEX16_2 MURAIPXI-E4JHF A MURAIPXI-E4JHF A
PCIEX16_3 D1480 A, B Third-party graphics hardware A
PCIEX16_4 MURAIPXI-E4JHF A MURAIPXI-E4JHF A
PCIEX16_5 D1480 A,B Third-party graphics hardware A
PCIEX16_6 MURAIPXI-E4JHF A MURAIPXI-E4JHF A
PCIEX16_7 D1480 A, B Third-party graphics hardware A
Slot Connectivity Configuration 1 Configuration 2 Configuration 3 Configuration 4
PCIEX16_1 x16 B B B B
PCIEX16_2 x8 / x4 A A A A
PCIEX16_3 x16 / x8 A A B* B*
PCIEX16_4 x8 / x0 A A A A
PCIEX16_5 x16 / x8 A B* B* B*
PCIEX16_6 x8 / x0 A A A A
PCIEX16_7 x16 / x8 A A A B*