26
Matrox Display Wall – System Builder’s Guide
Configurations
Performance considerations with D-Series controller
Power supply
500 W redundant power supply
PCIe expansion slots
1 Gen 3.0 PCIe x16 link (or two PCIe x16 slots with x8 link)
2 PCIe x4 slots
Notes
Go to the system BIOS main page
H/W Monitor
Tab
Smart Fan Function
and set to
Normal
mode.
Ensure to have the following default settings for GPU. Go to the system BIOS main page
Chipset
System
Agent (SA) Configuration
Graphics Configuration
and select:
Primary Display
AUTO
Internal Graphics
Enabled
In the system BIOS main page, go to
Chipset
System Agent(SA) Configuration
Above 4GB MMIO BIOS
Assignment
and select
Enabled
.
On-board console support with D-Series controller. Requires 3.05 or later drivers.
Slot
D-Series based controller
Third-party based controller
Main
Option
Main
Option
PCIEX1_SLOT1
N/A
N/A
N/A
N/A
PCIEX4_SLOT2
N/A
N/A
N/A
N/A
PCIEX1_SLOT3
N/A
N/A
N/A
N/A
PCIEX16_SLOT4
MURAIPXI-E4JF
A, B
MURAIPXI-E4JF
A
PCIEX1_SLOT5
N/A
N/A
N/A
N/A
PCIEX16_SLOT6
D1480
B
Third-party graphics hardware
A
PCIEX4_SLOT7
N/A
N/A
N/A
N/A
Slot
Connectivity
Configuration 1
Configuration 2
PCIEX16_SLOT4
x8
B
A
PCIEX16_SLOT6
x16 / x8
A
B*
Summary of Contents for Mura D-Series
Page 30: ...30 Matrox Display Wall System Builder s Guide Motherboard layout...
Page 40: ...40 Matrox Display Wall System Builder s Guide Motherboard layout...
Page 51: ...Matrox Display Wall System Builder s Guide 51 Motherboard layout...
Page 69: ...Matrox Display Wall System Builder s Guide 69 Motherboard layout...
