Matrox Mura D-Series, System Builder'S Manual

Page: 19 / 88

Matrox Display Wall – System Builder’s Guide 19
ECA EVS-540-ASMB-815
Configurations
D-Series based controllers Third-party based controllers
Validated Yes No foreseeable compatibility issues
Maximum number of cards
supported
5
Maximum supported
Mura IPX Series
4
Maximum supported
D-Series
4
Motherboard Advantech ASMB-815
Part numbers: ASMB-815-00A1E / ASMB-815I-00A1E / ASMB-815T2-00A1E
Chipset Intel C621 / C622
Processor Intel® Xeon® Silver 4210R CPU @ 2.40 GHz
Heatsink (for CPU) LGA 3647
System BIOS version 5.14, 2020-04-23
System memory 32 GB DDR4 ECC-RDIMM
Chassis 4U
Power supply 750 W
PCIe expansion slots

2 PCIe x16 3.0 slots (x16 mechanical, x16 / x8 electrical)

3 PCIe x8 3.0 slots (x8 mechanical, x8 electrical)

1 PCIe ×4 3.0 slot (×4 mechanical, ×4 electrical)
Notes

Requires two 120 mm x 120 mm x 25 mm 150 CFM chassis fans.
 The dust protection sponge filter in front of the chassis must be removed for proper system ventilation
when the smart fan is enabled.
 If you use a wired mesh filter in front of the chassis, the smart fan must be disabled. The chassis fans must
run at full speed.
 Filter requires a 18 x 18 size 304 stainless steel wire mesh.

In the system BIOS, go to
Advanced

IT8528 HW Monitor Tab

Fan Configuration Tab

select the header to
which the chassis fans are connected  and select the
Smart Fan Mode
:

Enabled
(when dust protection filter is removed)

Disabled
(when wired mesh filter is present)

In the system BIOS, select
Socket Configuration

IIO Configuration
, and change the following from
[Auto]
to
[x8x8]
:

IOU1 (IIO PCIe Br2) [x8x8]
 IOU2 (IIO PCIe Br3) [x8x8]

In the system BIOS, select
Advanced

PCI Subsystem Settings
, and make sure
Above 4G Decoding
is enabled.
 On-board console support with D-Series controller. Requires 3.05 or later drivers.

Ensure to have the following settings for the GPU. In the system BIOS, go to
Platform Configuration

PCH
Devices
:

VGA Priority
- Select
Auto

Onboard VGA Controller
- Select
Enable
Slot
D-Series based controller Third-party based controller
Main Options Main Options
PCIEX1_Slot1 N/A N/A
PCIEX4_Slot2 N/A N/A
PCIEX8_Slot3 MURAIPXI-E4JF A MURAIPXI-E4JF A
PCIEX16_Slot4 D1480 B Third-party graphics hardware
PCIEX8_Slot5 MURAIPXI-E4JF A, B MURAIPXI-E4JF A