Matrox Mura D-Series, System Builder'S Manual

Page: 56 / 88

56 Matrox Display Wall – System Builder’s Guide
ASUS Pro WS C621 64L SAGE 10G
Configurations
D-Series based controllers Third-party based controllers
Validated Yes No foreseeable compatibility issues
Maximum number of cards
supported
4
Maximum supported
Mura IPX Series
3
Maximum supported
D-Series
4
Motherboard ASUS PRO WS C621-64L SAGE/10G
Chipset Intel C621
Processor Intel® Xeon® W-3223 CPU @ 3.50 GHz 64-lane CPU
Heatsink (for CPU) LGA 3647
System BIOS version 1001, 2020-02-19
System memory 32 GB DDR4 ECC-RDIMM
Chassis Chenbro RM41300 FS81
Power supply 750 W (P/N: EVGA SuperNOVA 750 G3)
PCIe expansion slots With 64-lane CPU

4 PCIe x16 3.0 slots (x16 mechanical and electrical)

1PCIe x8 3.0 slot
With 48-lane CPU

2 PCIe x16 3.0 slots (x16 mechanical and electrical)

2 PCIe x16 3.0 slots (x16 mechanical and x8 electrical)

1 PCIe ×4 3.0 slot
Notes  Requires a low profile CPU cooler.

Refer to the memory AVL list provided by ASUS to use with this motherboard.
 The chassis must be ordered from Chenbro. Power supply isn’t included with the chassis.

The chassis fans must run at full speed. To change the fan speed, go to the system BIOS main page

Monitor

select the header to which the chassis fans are connected

change from
Generic
to
Full Speed
and apply the changes.
 In the system BIOS main page, go to
Advanced

Boot
, then set
Above 4G Decoding
to
ON
and
First VGA 4G
Decode
to
Auto
.
Slot
D-Series based controller Third-party based controller
Main Options Main Options
PCIEX16_1 D1480 B Third-party graphics hardware
PCIEX16_2 D1480 A, B Third-party graphics hardware A
PCIEX4_1 N/A N/A N/A N/A
PCIEX16_3 MURAIPXI-E4JF A, B MURAIPXI-E4JF A
PCIEX16_4 MURAIPXI-E4JF A, B MURAIPXI-E4JF A