Matrox Mura D-Series, System Builder'S Manual

Page: 58 / 88

58 Matrox Display Wall – System Builder’s Guide
ASUS WS C422 PRO/SE
Configurations
Performance considerations with D-Series controller
D-Series based controllers Third-party based controllers
Validated Yes No foreseeable compatibility issues
Maximum number of cards
supported
4
Maximum supported
Mura IPX Series
3
Maximum supported
D-Series
4
Motherboard ASUS WS C422 PRO/SE
Chipset Intel C422
Processor Intel® Xeon® W-2133 CPU @ 3.60 GHz
Heatsink (for CPU) LGA 2066 for Intel® Xeon-W series
System BIOS version 0702, 2018-06-14
System memory 32 GB DDR4 RDIMM
Chassis Chenbro RM41300-FS81 (includes fans)
Power supply 750 W (P/N: Corsair RM750x)
PCIe expansion slots

2 PCIe x16 3.0 slots (x16 mechanical, x16 electrical)

2 PCIe x16 3.0 slots (x16 mechanical, x16 / x8 electrical)

1 PCIe ×4 3.0 slot (x4 mechanical, x4 electrical)
Notes  The chassis must be ordered from Chenbro. Power supply isn’t included with the chassis.

Make sure you have the following default settings for Above 4G Decoding. In the system BIOS main page,
go to
Boot
, then set
Above 4G Decoding
to
ON
and
First VGA 4G Decode
to
Auto
.

To use the on-board graphics, make sure the
3-pin VGA_SW1 jumper
is set to
Enable
on the motherboard. Then
install the VGA bracket cable that came with the motherboard in an empty slot and connect to the internal
VGA connector VGA_HDR1 on the motherboard.
Slot
D-Series based controller Third-party based controller
Main Options Main Options
PCIEX16_1 D1480 Third-party graphics hardware
PCIEX16_2 D1480 A, B Third-party graphics hardware A
PCIEX4_1 N/A N/A N/A N/A
PCIEX16_3 MURAIPXI-E4JF A, B MURAIPXI-E4JF A
PCIEX16_4 MURAIPXI-E4JF A, B MURAIPXI-E4JF A
Slot Connectivity Configuration 1 Configuration 2 Configuration 3
PCIEX16_1 x16 B B B
PCIEX16_2 x16 A A B
PCIEX4_1 x4 N/A N/A N/A
PCIEX16_3 x16 / x8 A A B*
PCIEX16_4 x8 / x0 A A A