Matrox Monarch LCS, User Manual, Page: 48 / 106

36
Chapter 4, Using the Command Center
1
Under Layout , click on the type of side-by-side format you want to display.
2 Under Video , configure the following:
a
Select your video input sources. For Input A you can select either HDMI
or SDI .
b For SDI Output , specify whether your output is coming from Input A or
Input B.
c
For HDMI Output , specify whether your output is coming from Input A
or Input B, or if you want a Channel preview . If you select Channel
preview , the HDMI output will display the video at the resolution of the
streaming/recording output, allowing you to view what the remote viewer
will receive.
3 Under Audio , select your audio input source (analog, digital input A or
digital input B) and configure the Sample Rate and Bit Rate .
4
Click Apply .
The Operating Mode is configured. In the Command Center’s side menu, the
Operating Mode indicator shows the status only, but that status reflects whichever
format you chose to display.
For more information, see the following sections:
• “Using the Command Center side menu” on page 24 .
• “About the Operating Modes” on page 29 .
• “Configuring video and audio settings” on page 29 .