Matrox Monarch LCS, User Manual, Page: 40 / 106

28
Chapter 4, Using the Command Center
to “Faulty” and/or “Critical”. The error status will remain as long as a problem is
detected and has not been resolved. The Warning LED will turn off and the
Warning icon (
) will disappear when the condition is corrected, and the
Status page will automatically update the fan/temperature status back to
Normal.
The temperature may come down on its own over time, and so the Warning LED
will turn off, the Warning icon disappear, and the fan and temperature statuses
will return to Normal; however, the Warning LED will light up, the Warning icon
reappear in the Command Center again and the error status will display (above
the
Messages section of the Status page) if/when the temperature rises once
more.
The fan operates as an uptake under the device. For good fan operation, ensure
that the device is not placed on top of paper, and that it is used in an area with
adequate air circulation. If a fan or temperature error occurs:
• Check that the fan is spinning and is unobstructed.
• Verify that the area has suitable sufficient ventilation and that the ambient
temperature has not risen.
Settings page
The Settings page lets you configure the Monarch operating modes, video/audio
settings, encoder settings, and profiles.
¡ Important Please note the following:
• If you leave the Settings page before clicking Apply , all changes will be
lost.
• Do not connect or disconnect any cables to the Monarch LCS while settings
are being applied.
Production tab
The Production tab in the Command Center lets you select the Monarch
Operating Mode, and configure the related video and audio settings.
To access the Production tab, open the Monarch LCS Command Center (see
“Accessing the Command Center” on page 20 ), click Settings , and then click
Production .