Matrox Monarch LCS, User Manual, Page: 44 / 106

32
Chapter 4, Using the Command Center
c
For HDMI Output , specify whether your output is coming from Input A,
Input B, or from both. If you select From input A or B , the Operating
Mode indicator in the Command Center side menu becomes a button that
can toggle between inputs dynamically.
2 Under Audio , select your audio input source (analog, digital input A or
digital input B) and configure the Sample Rate and Bit Rate .
3
Click Apply .
The Operating Mode is configured. In the Command Center’s side menu, the
Operating Mode indicator shows the status, but can also be a button that affects
the video output. The button can be used to preview either Input A or B.
For more information, see the following sections:
• “Using the Command Center side menu” on page 24 .
• “About the Operating Modes” on page 29 .
• “Configuring video and audio settings” on page 29 .
• “Mode” on page 37 .
Configuring Switcher mode
In Switcher mode, you can perform a full-frame dynamic switch from one video
input to the other. Although processed independently, the two channels are
always started and stopped synchronously.
To configure Switcher mode: