Matrox Monarch LCS, User Manual, Page: 39 / 106

27
Status page
Monarch LCS errors
The Warning LED illuminates on the Monarch LCS device and the Warning icon
(
) appears in the Command Center when an error occurs .
Remarks
• The Status page displays the errors pertaining to that Monarch LCS device
only.
• An error will not be reported if the audio connected to the Monarch analog
audio input is lost or missing. If this occurs, the stream and/or recording
continues, but will not contain audio.
• When you click the Clear messages button on the Status page, the logged
errors are deleted from the list, the Warning LED will turn off, and the
Warning icon will disappear if it is not a fan or temperature-related error (see
“Fan and Temperature errors ).
• If one of the channels unexpectedly fails and stops, for example, due to a full
storage device, while the other channel is still running, you can restart the
stopped channel from the Command Center once you have resolved the
issue.
¡ Important
Do not use the ENCD button on the front panel to restart the
process. Pressing the ENCD button while the other channel is running will
stop it, requiring that you restart both channels.
Streaming and recording errors
Streaming and recording errors are instantly logged in the Messages section of
the Status page. Clicking the Clear messages button on the Status page
deletes the logged error from the list, the Warning LED turns off, and the
Warning icon (
) disappears (see “Status page” on page 26 ). The Warning
LED will turn off, and the Warning icon ( ) disappear also if you successfully
start a new stream and/or recording.
¦ Note
Powering off or resetting Monarch LCS will clear streaming and
recording errors from the device.
Fan and Temperature errors
The fan is located under the device, and a constant readout of both the fan and the
temperature statuses appear above the
Messages section of the Status page. A
fan or temperature error will be indicated in this area as well. No fan or
temperature-related error message will be shown in the
Messages section (see
“Status page” on page 26 ).
¡ Important
This error won't stop the device; however, we recommend that you
address the issue as soon as possible.
The display reads “Normal” for the fan and temperature when the fan is operating
without a problem. If a fan and/or temperature error occurs, the status will change