Matrox Meteor-II /Digital Installation And Hardware Reference Download Page 27

Page: 27 / 84

26 Chapter 2: Hardware installation

Matrox Meteor-II /Digital for PC/104-

Plus

Matrox Meteor-II /Digital for PC/104

-Plus

form factor has four

connectors, which are indicated in the diagram below.

■

Two video input interface connectors.

Used to receive

digital video, as well as send and receive synchronization
signals and power.

■

PC/104-

Plus

(PCI) connector.

An interface connector to

send data across the PCI bus.

■

PC/104 (ISA) connectors.

Two interface connectors to send

data across the ISA bus.

Connecting a video input to Matrox Meteor-II /Digital
for PC/104-

Plus

Connect your video source’s cable to the custom cable that you
attached to the video input interface connectors on Matrox
Meteor-II /Digital for PC/104-

Plus

(see the section

Installing

Matrox Meteor-II /Digital for PC/104-Plus).

PC/104-
(PCI)

Plus

PC/104
(ISA)

Video input

interface

connectors

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Summary of Contents for Meteor-II /Digital





















































































Search results

Summary of Contents for Meteor-II /Digital

Reviews:

Related manuals for Meteor-II /Digital

Brands by name

Popular brands

Matrox Meteor-II /Digital, Installation And Hardware Reference

Search results

Summary of Contents for Meteor-II /Digital

Reviews:

Related manuals for Meteor-II /Digital

Brands by name

Popular brands