12 Chapter 1: Introduction
Matrox Intellicam
Matrox Intellicam is an interactive Windows program that
allows fast camera interfacing and provides interactive access
to all the acquisition features of your Matrox board. For boards
that accept non-standard video sources, Matrox Intellicam also
has the ability to create custom digitizer configuration format
(DCF) files, which MIL and its derivatives use to interface to
specific non-standard video sources. Matrox Intellicam is
included with MIL /ActiveMIL and MIL-Lite /ActiveMIL-Lite.
What you need to get started
To begin using Matrox Meteor-II /Digital, you need the
following:
■
A computer with a PCI bus and an Intel Pentium processor
(or equivalent) or better.
■
Microsoft Windows if using Matrox Imaging software
(consult the Matrox Imaging software package for specific
supported environments and computer memory/storage
requirements).
Other useful
considerations
■
A computer with a relatively up-to-date PCI chipset, such as
the Intel 440BX, 810, 815E, 820, 840, or 850 for full Matrox
Meteor-II functionality. These chipsets are recommended
because they generally offer better performance in terms of
data transfer rates.
■
A computer with an empty full-length 32-bit PCI expansion
slot (bus-master capable).
■
A CD drive, and a hard disk or network drive on which to
install the Matrox Meteor-II software.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
