Installing Matrox Meteor-II /Digital 23
9. Set the rotary switch (next to the PC/104 (ISA) connector)
to 0 if installing the first stackable board, or another
appropriate setting if not the first. See the section,
Multiple
board installation
in Chapter 4.
10. Connect your video sources. For details, see the section
Connecting a video input to Matrox Meteor-II /Digital for
PC/104-Plus
.
11. Turn on your computer.
In some cases, when you boot your computer, Windows’
Plug-and-Play system will detect a new PCI card and you
will be asked to assign a driver to it. At this point, you
should
click on
Cancel
because the driver will be installed
during the installation of MIL or one of its derivatives.
❖
Matrox Meteor-II /Digital for PC/104-
Plus
can be used with
Matrox 4Sight-II. When ordered as part of the Matrox
4Sight-II unit, Matrox Meteor-II for PC/104-
Plus
comes
pre-installed. See the
Matrox 4Sight-II installation and
hardware reference
manual for more information.
PC/104-
(PCI) connector
Plus
PC/104
(ISA)connector
Rotary
switch
Video input
interface
connectors
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
