Matrix EON510 User Manual Download Page 20

Page: 20 / 186

Matrix EON510/VP510 User Guide

Bottom View

LCD Display

The LCD display of the phone is backlit. The LCD backlight can be turned on and off as well as adjusted for
contrast and brightness from the

“Display Settings”

of the Phone Menu.

Ringer LED

The Ringer LED will glow in Blue (1 sec ON – 500 msec OFF) to indicate incoming internal and external calls.

Navigation Keys

The functions of each are described briefly below.

•

Up Key:

To scroll upwards while navigating the Menu/sub-menu or to access Phone Settings and set the

Ringtone (when phone is in the idle state).

•

Down Key:

To scroll downwards while navigating the Menu/sub-menu or to access Network Parameters

(when phone is in idle state).

•

Forward Key:

To move forward when dialing a number or scroll to view the Context Sensitive Key options.

RJ9 Connector to connect Spring Cord of the Handset

3.5 mm Audio Jack connector to connect the Headset

RJ9 Connector to connect the Headset

DJ Jack to connect the Power Adapter

RJ45 Connector to connect the Router/LAN Switch

RJ45 Connector to connect the PC/Computer

RJ45 Connector to connect DSS532

Summary of Contents for EON510



























































































































































































Search results

Summary of Contents for EON510

Reviews:

Related manuals for EON510

Brands by name

Popular brands

Matrix EON510, User Manual

Search results

Summary of Contents for EON510

Reviews:

Related manuals for EON510

Brands by name

Popular brands