Matrix A3x-01 Ascent Trainer, Service Manual

Page: 45 / 69

41
8.12 reAr sHroUd rePlAceMent
1) Remove the 3 screws on the outer shroud (1 at the rear of the machine and 2 at the front) (Figure A).
2) Remove the 6 screws on the inner shroud (Figure B).
3) Remove the shrouds from the machine. (Figure C)
4) Repeat the same steps for the other side of the machine.
5) Reverse steps 1-4 to install new shrouds.
6) Test the Ascent Trainer for function as outlined in Section 8.20.
cHAPter 8: PArt rePlAceMent gUide
figUre A
figUre b
figUre c