3-32
Masterflex REGLO Digital Pump Drive with Advanced Connectivity
Section 3: Operation
Masterflex
Saving Remote Mode Settings as a New Program
Changes made to mode parameters can be saved as a new program for easier access to frequently used mode
settings.
To save mode parameters to a new program:
1. If required, edit the Remote Mode settings as desired.
2. Tap MODE NAME BANNER to return to the Mode Selection screen.
3. Tap NEW PROGRAM.
NOTE:
If NEW PROGRAM is not displayed on the Mode Selection screen tap
SCROLL to view additional pages.
4. Tap REMOTE. The Remote New Program screen will be displayed with the last settings used in the
Remote Mode.
5. Tap PROGRAM1. If required, delete the characters using the back arrow on the onscreen keypad and
then enter the desired program name (up to 8 characters).
6. Tap CONFIRM to save or DELETE to cancel.
NOTE:
• Once saved, new programs are added in alphabetical order to the bottom of the Mode Selection screen.
• If there are multiple programs tapping SCROLL will display additional pages.
