49
EN
Put the meat into an oven-pan, add approx. 10
•
spoonfuls of water and cover it with a lid. Then
put the pan into the oven, place it on the mesh on
a chosen level, and close door of the oven.
Using the functional knob choose the position
•
, and using the thermoregulator knob set
the temperature of 220
0C.
Press
•
button and using „+” and possibly „-”
setting buttons determine the roasting time i.e. 2
hours.
Press
•
button and using „+” and possibly „-”
setting buttons set the time of 17.00 (time when
roasting is complete).
Operation of the oven has be programmed and it will
be carried out automatically.
At 15.00 the oven will be switched on automatically
and it will run for 2 hours. At 17.00 the appliance will
be switched off automatically which is signalled by
activation of the sound signal. At this time „
AUTO
”
pulsates and
is off.
If the dish is not roasted sufficiently, you may re-pro
-
gram operation of the oven, or press the manual ope
-
ration button and control further roasting.
COMMENT !
Pressing
1.
button during operation of the
oven will enable you to display the program
-
med time of switching off.
When
2.
button is depressed, the program
-
med time of the oven operation is displayed.
If the oven has already started to run, the time
which is left to complete the program will ap
-
pear.
12.8 Changing settings
Settings can be changed within the period up to 5s
from commencement of programming or after dele
-
tion of the program.
Changing the time of operation:
press
–
button,
using „+” and „-” buttons you can set a new
–
time.
Changing the time of switching off:
press
–
button,
using „+” and „-” buttons you can set a new
–
time.
12.9 Deleting settings
Deleting the time of operation:
press
–
button,
press „-” button and hold it till the message „0.00”
–
appears on the display.
Changing the time of switching off:
press
–
button,
press „-” button and hold it till the message „0.00”
–
appears on the display.
When the program is deleted, operation of the oven
can be re-programmed.
12.10 Manual control
If during execution of the program the user in
-
•
tends to start manual operation, the program
should be deleted and
button should be
pressed.
Pressing of this
•
button will disable functions
of the programmer. Then the oven is operated
only using the oven functional knob and tempe
-
rature regulator knob.
In the manual control mode you can use the ti
-
•
mer.
NOTE !
Pressing button will result in switching over
to the manual operation mode. It means that he
-
aters of the oven are switched on for undeter
-
mined time; in order to switch them off, set the
functional knob of the oven to „0” position.
12.11 Locking function
This function enables protection from tampering of
children. It means that when this function is chosen,
the child may select any program on the programmer
but the program will not be changed.
Before any protecting actions are started, the pro
-
grammer should be in the manual mode.
Locking the oven:
simultaneously press
–
and
buttons and
hold them in this position for approx. 8 seconds,
till the word „
ON
” appears on the display,
press „+” button,
–
the word „
–
OFF
” appears on the display and the
lock symbol is illuminated,
after approx. 5s the current time appears on the
–
display near the lock symbol ; the oven is loc
-
ked.
Unlocking:
the programmer should be in the manual mode,
–
simultaneously press
–
and
buttons and
hold them in this position for approx. 8 seconds,
till the word „
OFF
” appears on the display,
