User Manual
P a g e
|
5
of
49
General
warnings
WARNING
It is dangerous to ignore the specified limits for
the instrument or its related accessories.
Do not use the instrument or accessory if it is not
in its normal condition.
Use the applicable protection and obey all safety
precautions.
Do not use the instrument in locations with
explosive gas, vapor or dust. There is a risk of an
explosion
Electrical
warnings
To prevent electrical shocks or damage to the
instrument, do not connect more than 30V
between the terminals, or between the terminals
and the ground.
This instrument uses a Lithium-Ion battery pack.
To prevent an explosion or fire, do not short
circuit, do not disassemble, and keepit safe from
damage. For operating conditions, see section 6.1
on Page-47
To prevent battery leakage or heat generation,
only use the battery charger in the temperature
range 0 to 45°C (32 to 113°F). For operating
conditions, see section 6.1 on Page-47.
To make sure the display shows the correct data,
disconnect the test leads before you set the
power to on or change to another measure or
source function.
Cautions
To prevent damage to the display, do not use
sharp objects on the screen.
Before you start an operation or procedure in this
publication, make sure that you have the necessary
skills (if necessary, with qualifications from an
approved training establishment). Follow good
engineering practice at all times.
