20
of
49|
P a g e
UserManual
This icon will appear if HART is enabled from
MENU
SETTING
HART
page. (This icon is visible for
mA(24V) Input Type only. For other Input Types this will
invisible regardless of HART settings)
Bar Graph
Horizontal Bar graph according to Input Percentage Value
(0.00% - 100.00%).
Percentage Value
The Percentage Value in (0.00% - 100.00%) according to
Input Value.
Tare
The Tare Value Set from
MENU
DISPLAY
MEASURE-Tare
page
Actual Value
The Raw Input Value without any scaling
This will appear only if
Main Display
in
MENU
DISPLAY
MEASURE
is set to
PERCENTAGE/SCALED.
Min
Displays the minimum value found after a measurement was
started or minimum was reset.
Max
Displays the maximum value found after a measurement was
started or maximum was reset.
Max-Min
Displays the Maximum-Minimum value found after a
measurement was started or Maximum-Minimum was reset.
Cumulative Average
Displays the Cumulative Average value found after a
measurement was started or Cumulative Average was reset.
2. Source
Source Window
Output Type
The Output Type.
mA
mA Current Output
mA(2W)
mA Current (2-Wire Simulation) Output
mV
mV Voltage Output
V
V Voltage Output
Source Display
Mode
The Source Reading Display Mode.
Actual
Displays the Raw Output Value without any scaling
Percentage
Displays the Percentage Value in (0.00% - 100.00%)
Scaled
Displays the Scaled Value
Source Reading
The Reading as per the Source Display Mode
Source Feedback
The Feedback ADC Reading in Output Unit.
