Model: DDU-24/26
Doc. Ref. no. : - m06bom101
Issue no. 09
Page 34 of 51
User’s Manual
14. NOT
This command is used to change
NTP Number of time out counts
before switching servers
forDDU-24/26.
Number of time out counts before switching servers me should be entered between1 to 15.
Enter new Number of time out counts before switching servers and Press Enter. To save the new
Number of time out counts before switching servers Press
„Y‟
else press
„N‟.
If you press
Y
new
Number of time out counts before switching servers will be saved and if you press
N
the previous
Number of time out counts before switching servers will be retained.
Number of time out counts before switching servers for DDU-24/26 is 3 by default.
15. SNS
This command is used to enable or Disable
Secondary Server Option for NTP
for DDU-24/26.
The Selection of Secondary NTP server enables or Disable by Pressing
„E‟
or
„D‟
followed by enter
Key respectively
.
To save the Selection of Secondary Server Option Press
„Y‟
else press
„N‟.
If you press
Y
new
Selection of Secondary Server option will be saved and if you press
N
the previous Selection of
Secondary Server will be retained.
By Default Secondary server Option for NTP is Disable.
