Model: DDU-24/26
Doc. Ref. no. : - m06bom101
Issue no. 09
Page 38 of 51
User’s Manual
6. ETH0 [ETH(Zero)]
This command is used to see present NTP configurations.
7. Q
This command is used to close Telnet session.
6.4.3.3 Important Points for Telnet Configuration
Digital
Display Unit‟s Telnet Server has timeout period of 5 minutes. If you do not press any
character till 5 minutes, the session will be automatically closed with a message of Timeout, Session
Closed.
Commands are case insensitive.
If Display Unit Telnet server is open at that time Display Unit will not synchronize with the NTP Time
Source.
Display Unit operates in NTP client mode.
