Model: DDU-24/26
Doc. Ref. no. : - m06bom101
Issue no. 09
Page 22 of 51
User’s Manual
The communication parameters include baud rate, number of stop bits and parity.
User Can Set Manual Time if no availability of Time Inputs.
The user is free to choose Time Display, Date Display and Both in Alternate Time/Date Display.
User can set any Standard Time Zone Offset, in any Input like Wireless and Serial.
The user can enter the time offset of the time zone, where the unit is to be installed.
Users can set Default all Configuration Parameter and View Current Configuration Parameter using
Key Configuration.
The user can set the Retransmission using RF, Serial or Both.
User can set blinking of Date DP and Time Display Colon in unlock condition.
In Ethernet Configuration, User can set, IP, MASK, GATEWAY, SUBNET, Primary Server IP,
Secondary Server IP, NTP Query Interval Time [When Querying NTP Server] , Query Request Time
Out , Query Retry Interval , Number of Time outs Before switching Servers, Secondary Server Option
For NTP.
6.2.1 Run Mode
As Shown in Fig 18 DDU-24/26, will display Time or Date as per set parameter in Run
mode.
6.2.2 Password Mode (PSWD):
To enter in Password mode long press Enter key for 4 Seconds, it will show
PSWD
in
Display. Enter Password using UP, Shift and Enter Keys, DDU-24/26 will enter in
Configuration mode and Display
DISP
on Display.
6.2.3 Configuration Mode through Keys
6.2.3.1 Display Configuration Mode (DISP):
Press Enter Key to Enter in Display mode, it will enter in View mode and shows Current
Display Mode.
Press Enter in View mode to enter in Edit mode , in Edit mode it will shows
Time
,
Date
and
Both
mode , Press Enter key to set the any Display mode.
Time mode will display time in Run mode, Date mode will display Date in Run mode and
both option will Display Time and Date Both, Date will be displayed at seconds 18-20,
38-40, and 57-60 of minute.
6.2.3.2Time Mode Set Configuration (T-MD):
Press Enter Key to Enter in Time mode, it will enter in View mode and shows Current
Time Mode.
Press Enter in View mode to enter in Edit mode , in Edit mode it will shows
12HR
for 12
hour time format and
24HR
for 24 hour time format , Press Enter key to set the any One
Time mode.
6.2.3.3 Date Mode Set Configuration (D-MD):
Press Enter Key to Enter in Date mode, it will enter in View mode and shows Current
Date Mode.
Press Enter in View mode to enter in Edit mode, in Edit mode it will shows
DDMM
and
MMDD
Date format, Press Enter key to set the any One Date mode.
6.2.3.4 Manual Time Set Configuration (S-TM):
Press Enter Key to Enter in Manual Time Set mode, it will enter in View mode and shows
Current Time on Display.
Press Enter in View mode to enter in Edit mode, in Edit mode Set time using INC and
SHIFT Keys, Press Enter key to set the Time.
