Model: DDU-24/26
Doc. Ref. no. : - m06bom101
Issue no. 09
User’s Manual
Page 27 of 51
Press Enter in View mode to enter in Edit mode, in Edit mode Set RF Transmit Channel
using INC Key, Press Enter key to set the RF Receive Channel.
In Edit mode it will show
0-9
and
Auto
options.
Auto mode is disabled when you are selecting
RF
and
BOTH
option in retransmission
configuration.
Auto mode is enabled when you are selecting
no
and
ser
in retransmission
configuration.
In Auto mode DDU-24/26 will scan RF channel between
0
to
9
for Receiving RF Signals
from Wireless master Time Signal provider.
When unit receive RF Time Frame at that time Wireless Rx Led glow.
You can show the RF receive channel at power on.
6.2.3.11 Unlock Blink Set Configuration (UNLO):
This option will used in unlock condition, if you want stop blinking of Colon in Time
Display and DP in Date Display.
Press Enter Key to Enter in Unlock Blink mode, it will enter in View mode and shows
Current Unlock Blink Mode.
Press Enter in View mode to enter in Edit mode , in Edit mode it will shows
BLOf
to stop
blinking and
BLO2
,
BL05
and
BL10
to blink colon and DP in unlock condition after, Press
Enter key to set the any One Blinking option.
User can set time to start Blinking colon and DP in unlock condition when the unit is not
synchronize or receive Time frame Input from the master within the configurable time.
User can set configurable time 2 second, 5 second or 10 second by setting option
,
and
respectively.
By default unlock blinking time is 10 second.
6.2.3.12 Password Set Configuration (PSWD):
Press Enter Key to Enter in Password mode, it will enter in View mode and shows
Current Password on Display.
Press Enter in View mode to enter in Edit mode, in Edit mode set password using INC
and SHIFT Keys, Press Enter key to set Password.
6.2.3.14
Retransmission configuration (RE.TR):
Press Enter Key to Enter in Retransmission, it will enter in View mode and shows
Current configuration of Retransmission.
Press Enter in View mode to enter in Edit mode, in Edit mode set configuration of
Retransmission using INC and SHIFT Keys, Press Enter key to set the Retransmission.
In Edit mode it will show four options
no
,
rf
,
ser
and
both.
If unit is serial and wireless
input model.
Press Enter key to set retransmission.
It transmits time of its internal RTC using RF and Serial.
In
configuration
option selected by default if receive channel in
configuration and transmit channel in
configuration are same and If you are In
Retransmission configuration for selecting
or
option.
If unit is only serial Input Model then only two option
or
available in
Retransmission configuration.
If unit is only wireless Input Model then only two option
or
available in
Retransmission configuration. If you are select Auto mode in RF receive channel
configuration then
no
option is available in retransmission mode.
If you are select Auto mode in RF receive channel configuration then
no
and
ser
option
is available in retransmission mode for wireless and serial input model.
When it Transmit RF or Serial Time Frame at that time Wireless or Serial Tx Led glow.
When it Receive RF or Time Frame at that time Wireless or Serial RX Led glow
respectively.