Model: DDU-24/26
Doc. Ref. no. : - m06bom101
Issue no. 09
Page 20 of 51
User’s Manual
Installation Process for DDU-24-XP/DDU-26-XP:
1. Open the Front cover of DDU-24/26-XP using Allen Key No:-6.
2. Open the Screw mounted on MH2 and MH5 mounting hole of Display PCB.
Shown in figure 16.
3. Move PCB upward as shown in figure 11.Pass the Power cable and Serial connector
cable from the separate Gland .Make the connection according to Terminal connection
describe in 5.1 sections
4. After connecting a cable and Serial connection as per connection details. Mount PCB
back on stud as before on MH2 and MH5
5. After that Power ON the unit.
6. Configure the unit as per your Requirement with help of Keys on PCB, for configuration
details please refer section.
7. After successful configuration close the front cover using Allen key and mount it on the
wall.
Figure 21 Open Screw Terminal of DDU-24-XP
Figure 22 connection of DDU-24-XP
Note:
The installation Process of DDU-26-XP is same as DDU-24-XP.
