Model: DDU-24/26
Doc. Ref. no. : - m06bom101
Issue no. 09
Page 26 of 51
User’s Manual
6.2.3.6Time Zone Configuration (OFST):
Press Enter Key to Enter in Time Zone offset mode, it will enter in View mode and
shows Current Time Zone offset on Display.
Press Enter in View mode to enter in Edit mode, in Edit mode set time Zone offset using
INC and SHIFT Keys, Press Enter key to set the Time Zone offset.
Please enter time zone b12:00 to -12:00 International standard.
6.2.3.7 Baud Rate Set Configuration (BAUD):
Press Enter Key to Enter in Baud rate Set mode, it will enter in View mode and shows
Current Baud rate on Display.
Press Enter in View mode to enter in Edit mode, in Edit mode Set Baud rate using INC
and SHIFT Keys, Press Enter key to set the Baud Rate.
In Edit mode it will show two options
9.60
for 9600 and
1.920
for 19200 baud Rate.
6.2.3.7Stop Bit Set Configuration (STOP):
Press Enter Key to Enter in Stop Bit Set mode, it will enter in View mode and shows
Current Stop Bit on Display.
Press Enter in View mode to enter in Edit mode, in Edit mode Set Stop Bit using INC
and SHIFT Keys, Press Enter key to set the Stop Bit.
In Edit mode it will show two options
1
for 1 Stop Bit and
2
for 2 Stop Bit.
6.2.3.8 Parity Bit Set Configuration (PRTY):
Press Enter Key to Enter in Parity Bit Set mode, it will enter in View mode and shows
Current Parity Bit on Display.
Press Enter in View mode to enter in Edit mode, in Edit mode Set Parity Bit using INC
and SHIFT Keys, Press Enter key to set the Parity Bit.
In Edit mode it will show three options
Odd
Parity,
Even
Parity and
none
Parity.
6.2.3.9 RF Transmit Channel Set Configuration (RF-T):
This Option only available in Wireless Input Model for Retransmission of Received
Signals for increasing the Range.
In Wireless input Model this option is available when in Retransmission configuration
(
.
) you are selecting
or
for Retransmission of Received Signals for increasing
the Range and also selecting receive channel between 0 to 9 except Auto mode in
Rf-r
for RF receive channel set configuration.
Press Enter Key to Enter in RF Transmit Channel Set mode, it will enter in View mode
and shows Current RF Transmit Channel on Display.
Press Enter in View mode to enter in Edit mode, in Edit mode Set RF Transmit Channel
using INC Key, Press Enter key to set the RF Transmit Channel.
In Edit mode it will show
0-9
and no options,
no
option for no re-transmission, It will
stop re-transmission.
When the unit is Transmitting RF Time Frame at that time wireless Tx Led glow.
You can show the RF transmit channel at power on.
If Unit Sync in Auto mode then after power off and on it will display RF receive channel
which unit previous lock in auto mode.
6.2.3.10 RF Receive Channel Set Configuration (RF-R):
This Option only available for Receiving Signals from Wireless master or Wireless Re-
Transmitter.
Press Enter Key to Enter in RF Receive Channel Set mode, it will enter in View mode
and shows Current RF Receive Channel on Display.
