Model: DDU-24/26
Doc. Ref. no. : - m06bom101
Issue no. 09
Page 42 of 51
User’s Manual
For DDU-26:
1. DD/MM/YY
2. MM/DD/YY
3. YY/MM/DD
In DDU-24/26, there is one option of setting Time for enable or disable the blinking of Colon and DP
in unlocking condition.
7.1.5 Serial Port Settings
In DDU-24/26, for serial port, there are 2 Baud rate given configurable.
1. 9600
2. 19200
Parity Bit can be configurable as Even ,Odd or None
Stop Bit can be configurable as 1 Stop bit or 2 Stop bit
All settings can be set by Key Configuration as shown in section 6.2
7.1.6 Time Zone Offset Settings
In DDU-24/26, Configurable Time Zone option is given.
User Can Set Standard Time zone offset b12:00 to -12:00.
All settings can be set by Key Configuration as shown in section 6.2
7.1.7 Manual Time Settings
In DDU-24/26, if there is no Time frame input available, at that time user can enter Manually Time
and Date, Manual Time set can be done by using Key configuration as shown in section 6.2.
This only available in Unlock condition and in lock condition, it will display LOCK, on display and did
not allow entering in this mode.
