Martin Professional Wizard Extreme, User Manual

Page: 22 / 43

22 Wizard Extreme user manual
Channel 4 controls the color wheel shake function. Color wheel shake
can be set to narrow or wide, and shake speed adjusted.
Channel 5 controls the gobo wheel. This channel functions even if the
stand-alone program is selected. When the stand-alone program is
running this channel still has active control of the gobo wheel, unless the
DMX value is set to greater than 250 (>98%).
Channel 6 controls the gobo wheel shake function. Gobo wheel shake
can be set to narrow or wide, and shake speed adjusted.
Channel 7 controls mirror drum swivel (pan) position and shake. This
channel has no effect if the stand-alone program is running.
Channel 8 controls mirror drum rotation (tilt) direction, speed and shake.
This channel has no effect if the stand-alone program is running.
Channel 9 allows one of 12 factory-set macros to be selected. The
macros are mini-programs that use all the fixture’s effects. Select a macro
if you want fast access to impressive light effects with minimal
programming.
Channel 10 controls the mirror drum swivel (pan) speed. Adjusting this
allows you to program fades on controllers without faders. If fade times
can be programmed on your controller and you use this function, turn the
speed function off and set mirror drum swivel to tracking by setting
channel 10 to zero. This channel has no effect if the stand-alone program
is running.
Channel 11 provides speed control of the color and gobo wheels, allowing
you to program slow or fast transitions from one effect position to another.
This channel has no effect if the stand-alone program is running.
W i z a r d e m u l a t i o n 8 - c h a n n e l D M X o p e r a t i o n
In Wizard emulation 8-channel mode, the Wizard Extreme emulates the
original Wizard fixture, using the original Wizard’s 8-channel extended
DMX mode. If Wizard emulation mode is set, the Wizard Extreme can be
added to an existing installation of Wizards and will behave exactly as if it
was a Wizard in 8-channel mode.
Channel 1 controls lamp on, lamp off, the dimmer and the strobe rate. It
also allows you to execute a random “stand-alone” program using
automatic or music trigger, and to reset all effects to their home positions.
Channel 2 controls the rotation of the parabolic reflector. This channel has
no effect if the stand-alone program is selected on channel 1.