Martin Professional Wizard Extreme, User Manual

Page: 21 / 43

DMX operation 21
DMX
OPERATION
The Wizard Extreme can be connected to and operated from a DMX
controller. To do this you need to:
1. Choose and set one of the three DMX modes. These three modes are
described in the following sections, “DMX modes” and “Setting the
DMX mode”
2. Set a DMX control address. This is described in “DMX control
address” on page 24.
D M X M O D E S
The Wizard Extreme can be operated in three DMX modes:
• 11-channel mode provides position control of all effects, plus
twelve factory-set macros, plus control of mirror drum swivel rate,
plus control of color and gobo wheel change speed.
• Wizard emulation 8-channel mode emulates the original best-
selling Wizard fixture, providing position control of all effects,
control of the mirror drum swivel rate, and color and gobo wheel
change speed.
• 1-channel mode allows control of the built-in stand-alone features
during music trig operation
Full details of the 11-channel, Wizard emulation and 1-channel mode
functions are listed in the DMX protocol sections on pages 35 - 40.
1 1 - c h a n n e l D M X o p e r a t i o n
Channel 1 controls lamp on, lamp off, the dimmer and the strobe rate. It
also allows you to execute a random “stand-alone” program using
automatic or music trigger, and to reset all effects to their home positions.
Channel 2 controls the rotation of the parabolic reflector. This channel
has no effect if the stand-alone program is selected on channel 1.
Channel 3 controls the color wheel and is used to select colors, split
colors, the twinkle effect and color rotation. When the stand-alone
program is running, this channel still has active control of the color wheel
unless the DMX value is set to greater than 250 (>98%).