Martin Professional Wizard Extreme, User Manual

Page: 12 / 43

12 Wizard Extreme user manual
O V E R H E A D M O U N T I N G
To hang the Wizard Extreme on an overhead support:
1. Verify that the structure can support at least 10 times the weight of all
installed fixtures, clamps, cables, auxiliary equipment, and other items.
2. If hanging the fixture with a rigging clamp, verify that the clamp is
undamaged and is designed for the fixture’s weight. Bolt the clamp
securely to the bracket with a grade 8.8 (minimum) M12 bolt and lock
nut, or as recommended by the clamp manufacturer, through the
clamp hole in the mounting bracket.
3. If permanently installing the fixture, verify that the hardware (not
included) and mounting surface can bear at least 10 times the fixture’s
weight. Any of the six 13mm (½ in.) holes in the mounting bracket may
be used for attachment, but ensure that the load is distributed evenly.
4. Working from a stable platform, clamp or fasten the fixture to the
structure.
5. Install a safety cable that can
hold at least 10 times the
weight of the fixture through
the safety cable eye on the
fixture (see illustration on
right).
6. Loosen the swivel locks, tilt
the fixture to the desired
angle, and retighten.
7. Verify that the fixture is at
least 0.1 meters (4 in.) from
the surface to be illuminated
and at least 0.3 meters (12 in.) from any combustible materials. Verify
that the clearance around the air vents is at least 0.1 meters (4 in.).
O P E R A T I O N F R O M T H E F L O O R
To operate the Wizard Extreme from the floor, you need the optional floor
stand (P/N: 91606008).
The stand is designed for use on a flat surface. It is not intended to be
used in any other way.
1. Attach the floor stand to the mounting bracket. The floor stand is
longer at one end. Install the stand so that the long end is positioned