20
Wizard Extreme user manual
MC-1
OPERATION
The Wizard Extreme is fully compatible with the Martin MC-1 controller.
This chapter describes information about how to configure the Wizard
Extreme for operation with an MC-1. For further information, refer to the
MC-1 user manual.
M C - 1 S E T T I N G S
DIP-switch pin 10 must be set to OFF to enable MC-1 mode operation.
Changes to the setting do not take effect until the fixture has been
powered off and on.
DIP-switch pins 6, 7, 8, and 9 control options that are most useful when
operating multiple Wizard Extremes from a single MC-1. Fixtures with
these options set will behave differently than other Wizard Extremes that
do not have these options set. This is useful if you want to make a light
show more diverse.
Option
Setting (0 = OFF, 1 = ON)
1
2
3
4
5
6
7
8
9
10
11
Use a different color
1
0
1
Use a different gobo
1
0
1
Rotate the mirror drum
in the opposite direction
1
0
1
Swivel the mirror drum
in the opposite direction
1
0
1
Summary of Contents for Wizard Extreme
Page 1: ...Wizard Extreme user manual...
Page 4: ......
