Martin Audio MLA User Manual Download Page 371

Page: 371 / 456

MLA System

USER GUIDE

MLA System

User Guide V2.1

371

…

The first stage is to load the D2P file created for the project using Display 2.1. Click on the 'Select D2P File' button and navigate

to the file location.

There are a couple of outcomes once the file has been loaded. If there is only one optimisation and all arrays are the same size

the files will automatically be loaded into the arrays, the greyed out "Assigned D2.1 Presets" boxes will appear bright green

showing that a Preset is assigned ready to be synchronised;-

As we may not want to disturb the arrays that are working perfectly well we may want to just upload the optimisation to the

new array with the module we have replaced. In this case drag the optimised file out of the array back to the "Available D2.1

presets" position and you will have the following;-

Summary of Contents for MLA









































































































































































































































































































































































































































































Search results

Summary of Contents for MLA

Reviews:

Brands by name

Popular brands

Martin Audio MLA, User Manual

Search results

Summary of Contents for MLA

Reviews:

Brands by name

Popular brands