Martin Audio MLA User Manual Download Page 279

Page: 279 / 456

MLA System

USER GUIDE

MLA System

User Guide V2.1

279

…

Parameters can be changed on the properties panel in three ways. The faders can be drag and dropped to a new value, the value

can be scrolled up or down using the up/down buttons to the right of the value windows, and finally values can be directly typed

into the value windows. The response graph will adjust according to the new values and vice versa, adjustments in the graph

window will be reflected in the fader positions and values in the properties panel.

The High pass filter only has a single fader for the corner frequency. This may be adjusted in exactly the same way as the faders

for the PEQ’s. The ‘Type’ drop down offers three types of filter and slopes from 6dB up to 48dB per octave;-

Summary of Contents for MLA









































































































































































































































































































































































































































































Search results

Summary of Contents for MLA

Reviews:

Brands by name

Popular brands

Martin Audio MLA, User Manual

Search results

Summary of Contents for MLA

Reviews:

Brands by name

Popular brands