Martin Audio MLA User Manual Download Page 222

Page: 222 / 456

MLA System

USER GUIDE

MLA System

User Guide V2.1

222

…

This enables two options for connected cabinets. The first is to run temperature monitoring for all amplifier and DSP modules

displayed in the array windows. These display two temperatures, the hottest of the amplifier modules, the module concerned

indicated by a number from 1 to 3 for MLA and MLA Compact (the amplifier modules are two channel). The second value is the

temperature of the module DSP section. This can be disabled to speed up network traffic for large, complex systems.

User Interface:

The final option in the Preferences window is User interface;-

This allows customisation of certain functions within the application.

Increment Values;-

These allow the default increment values for both Gain and Delay to be changed as required. The default for Gain is 0.5dB but

the options are for increments of 0.1, 0.2, 0.25, 0.5 or 1dB.

For delay, the default is 25ms, the options are 0.1, 0.2, 0.25, 0.5 or 1ms.

EQ Graph controls how the various parametric EQ filters are displayed in the array and Merlin windows;-

By default the graph will display the selected filter band that is being adjusted and the overall frequency response which keeps

the display from getting too cluttered. If you un-check the box the response of every active filter is displayed individually as well

as the overall response.

The Windows Power Option;-

Summary of Contents for MLA









































































































































































































































































































































































































































































Search results

Summary of Contents for MLA

Reviews:

Brands by name

Popular brands

Martin Audio MLA, User Manual

Search results

Summary of Contents for MLA

Reviews:

Brands by name

Popular brands