Martin Audio MLA User Manual Download Page 230

Page: 230 / 456

MLA System

USER GUIDE

MLA System

User Guide V2.1

230

…

The final window by default has Properties and Outline available but by using the ‘Show View’ option in the Window menu, you

can also select Network Status. This shows all three options available;-

Any of the three options can be viewed by clicking on the relevant button. As with the Project window any of the selected options

can be detached as a floating window, maximised or closed by clicking on the white arrow. If all options in the window are closed

the project window will fill the space, if that is also closed the Project window will fill the space.

The Properties window will show the properties for any element selected in the System diagram. The example above shows the

properties for a Merlin in an off line project. There are a number of options available for the Properties display selected by the

icons in the top right corner of the window;-

Summary of Contents for MLA









































































































































































































































































































































































































































































Search results

Summary of Contents for MLA

Reviews:

Brands by name

Popular brands

Martin Audio MLA, User Manual

Search results

Summary of Contents for MLA

Reviews:

Brands by name

Popular brands