Marshall Electronics VS-541-HDI, User Manual

Page: 28 / 52

4- Remote Configuration
___________________________________________________________________________
User Manual VS-541 – V01.0 Page 28 of 52 2/7/12

Zeroconf
By selecting ON , it allows Zeroconf Protocol on the client side discovery.

WS Discovery
The Discovery Function is based on Web Service being enabled. It allows SW Client
discovery that supports ONVIF.
Authentication

RTSP Authentication
If RTSP Authentication is ON , the client side user is asked to enter User ID and
Password.

HTTP API Authentication
By selecting ON , HTTP Authentication is used for all clients with HTTP API.
One-Way Streaming
This IP Camera provides two kinds of one-way (unidirectional) streaming based on
UDP to clients:
RTP and MPEG-TS . Both are a kind of broadcasting where traffic from
client to server is not generated at all.

RTP (Real-Time Transport Protoco l) is an Internet protocol used for
transmitting single real-time multimedia data such as audio and video to a select group
of connected clients. Normally, RTSP uses
RTP to format packets of multimedia
content. The RTP menu is used when the RTP is streaming without RTSP connection.
RTP stream will be transmitted to the destination set. The SDP (Session Description
Protocol) file can be found on the server and a client can retrieve it using an http
connection.
Related Settings are as follows:
- Destination IP : Set the IP Address of the Destination System which will receive the
RTP stream. If the system is a decoder, RTSP authentication information can be
entered in the middle of the RTSP URL as follows:
rtsp://admin:1234@192.168.10.100:554/video1
- Destination Port : Set the Destination System Port that will receive the RTP Stream.
- User Name : Enter the name that will be used as the User Name for the SDP File.
- File Name : Enter the name that will be used as the SDP File Name. It can be
accessed through http://ServerAddress/filename