4- Remote Configuration
___________________________________________________________________________
User Manual VS-541 – V01.0 Page 41 of 52 2/7/12
DISK
SD Memory can be used and at least 1GB size is recommended. A disk with either an
EXT3 or FAT32 File System can be read in Linux PC. However, only a disk with a
FAT32 File System can be read in Windows PC.
Less than 4Mbps of Video Bit Rate is recommended when you record and monitor
video simultaneously since frame dropping may happen due to performance limitation.
Disk Information
Be sure to restart the system after connecting an SD card. During booting, the system
reads status of disk and initializes it. Once the initialization of a disk is finished, the disk
status is shown on the
Record
page of the web-based setup.
Refer to the Chart for Disk Status:
Disk Status
Description
Disk Error Detected
Error.
No Disk
Disk is not connected to the system.
Searching Disk
Information
Checking the status of disk. Refresh the page and
wait until the status has changed.
Mounting and
Recovering Disk
Performing recovery process when disk damage is
found. It takes from seconds to minutes for
recovery.
Disk Format Needed
Unknown Disk Type
Detected
Disk is attached but the type of the file system is
unknown or damaged.
USB Disk Available
Available to be used for recording.
Disk Removed
Or Abnormal State
Disk is detached during operation or there is
damage on the file system. If it happens while disk
is connected, it is recommended to format the disk.
