4- Remote Configuration
___________________________________________________________________________
User Manual VS-541 – V01.0 Page 16 of 52 2/7/12
General
System ID
Enter System ID for the Camera Title
The set System ID is displayed with video image on Web browser. The System ID is
also transferred to remote software, such as VMS, and displayed on it.
BurnIn OSD System ID
BurnIn OSD System ID specifies the string to be inserted into video image before
encoding. Only alphanumeric and blank characters are allowed. Position and size can
be configured on
BurnIn OSD
section of the video page.
Language
Select the Language to be used for Web-Based Configuration.
Firmware
Firmware Version
Display the current Firmware Version.
Board ID
Display the Network Board ID of the camera recognized by system.
Upgrade
Upgrade Firmware
1. Press
Browse
button to select a firmware file from PC.
2. Press
Firmware Upgrade
button to start to upgrade.
3. Messages for showing status (downloading / upgrading) will be displayed.
4. The camera will reboot automatically after completing upgrade.
Do not turn off the
camera during upgrading.
Config Backup & Restore
Backup
All the configuration settings can be saved and stored.
Restore
Stored configuration can be browsed and restored. The server is rebooted when the
Config Restore
button is pressed.
