MARKEM Cimjet RFID, Operation & Service Manual, Page: 41 / 158

SECTION 1 General Information
0855904enb 4/05
m
®
1–29
3.3 Beacon Light (Optional)
The beacon light is situated in a prominent position on the Cimjet
RFID. The beacon has a three light system: green, blue, yellow.
• When the yellow light is on, the Cimjet RFID has switched out of
Auto Mode (to Set Mode ) or there is a fault on the machine
• When the green light is on, Cimjet RFID is awaiting a signal to
start the
Program, Verify, Reject, Apply sequence
• When the blue light is on, the tag is programmed successfully
and is ready to carry out the apply process
3.4 Networking
Cimjet RFID provides options for communicating with PCs and other
computers. The methods available are:
• A Serial link to a single PC
• Ethernet link