MARKEM Cimjet RFID, Operation & Service Manual, Page: 38 / 158

SECTION 1 General Information
1–26
m
®
0855804enb 4/05
3.1 Components of Cimjet RFID
The Cimjet RFID consists of a Dispenser and an Applicator.
The main components of the Cimjet RFID are shown in Figures 1-2,
1-3, and 1-4 . In addition, Cimjet RFID is usually supplied with an
adjustable height stand.
3.1.1 Dispenser
The tag dispenser provides the tag supply and can be left-hand or
right-hand. It consists of:
• Tag drive
• Sensors for tag control
• Operator interface
The dispenser is the main body of the Cimjet RFID and supports a
variety of different mountable applicator modules.
3.1.2 Applicator
Several modular applicators are available to meet your different
requirements.
The different applicators apply tags in different ways (for example:
air-blow, or telescopic tamp). The choice of applicator also
determines the face of the product that is tagged.
The applicator selected may vary from the type shown in the
following figures.
For more applicator information, refer to the Cimjet RFID Blow
Applicator Manual (0855906) and the Cimjet RFID Tamp
Applicator Manual (0855907).
3.2 Tag Sizes
Tag sizes are applicator-specific.
For more information, refer to the Cimjet RFID Blow Applicator
Manual (0855906) and the Cimjet RFID Tamp Applicator Manual
(0855907).