User’s Guide
the length of the screw. Re-install the column cover.
10.2 Check for loosened grips and attachments - daily
Check to ensure that the grips attached to the force gauge and
base plate are firmly secured. Looseness could result in a poten-
tially hazardous situation.
10.3 Check for loosened components – once per month
1. Remove the test sample from the test stand.
2. Turn off power to the test stand and disconnect the
power cord. Attempt to loosen subcomponents of the
test stand (ex. fasteners, brackets, etc). All components
should be firmly attached. If any looseness is detected,
stop using the test stand and contact Mark-10 or a dis-
tributor for instructions.
36
