User’s Guide
If travel indication is enabled, the screen appears as follows:
The item selected will be capitalized, as shown in the figure above.
The
set
speed can be changed in Test Parameter Setup. If en-
abled, the up and down speeds can be configured independently of
each other (
UP SPEED
and
DN SPEED
). Otherwise, the
SPEED
setting corresponds to crosshead speed in both directions.
6.2 Menu Navigation
At power-up, the display will show the operation screen for which-
ever mode was used last. The display will appear as one of the fol-
lowing:
Basic & Auto Return Modes (travel indication not enabled):
m e n u
m i n
m a x
S E T
1 . 2 7 5
. 0 0
0
TRAVEL
SPEED
menu
Enters Test Parameter Setup
min
Sets speed to minimum speed
max
Sets speed to maximum speed
set
Sets speed to the programmed SPEED, UP SPEED,
or DN SPEED setting
m e n u
m i n
m a x
S E T
S p e e d :
. 0 0
0
22
