Model ESM301 Programmable Force Test Stand
down. Releasing the button will stop movement imme-
diately.
3. Auto
Holding down the button for more than 0.5 seconds will
enter momentary mode, at which time an audible indi-
cator will sound and the LED indicator on the button
pushed will be illuminated. A short tap on the button will
operate the test stand in maintained mode. Pressing
UP
,
DOWN
, or
STOP
during maintained mode will stop
crosshead motion.
Default setting: maintained
Available settings: maintained, momentary, auto
5.13 Default Settings (DEFAULT?)
This setting provides a quick return to factory settings, as follows:
SPEED:
10 in/min
UP SPEED:
10 in/min
DN SPEED:
10 in/min
AUTO RETURN:
off
CYCLING:
00000
(off)
UPPER LM:
+
12.000
LOWER LM:
-12.000
OVERLOAD V:
OFF
C OVERLOAD:
100%
T OVERLOAD:
100%
CONTROL:
CONSOLE
BAUD
RATE:
9600
KEYS:
m a i n t a i n e d
ESC
ENTR
+
_
+ or –
Cycles through the available settings
ENTR
Returns to the Test Parameter Setup menu
ESC
Exits the parameter without saving changes
19
