Model ESM301 Programmable Force Test Stand
5
TEST PARAMETER SETUP
This section provides configuration instructions for each test pa-
rameter. Parameters include:
All ESM301 test stands are shipped in
Demo Mode
, which provides
full functionality of all features (except integrated travel indication)
for an evaluation period of 160 operating hours.
Demo Mode
can be
disabled by pressing and holding
STOP
while turning on power to
the test stand. This mode can be re-enabled in the same fashion,
and will be active for the remaining number of hours.
After
Demo Mode
expires, only installed features will be displayed
in Test Parameter Setup. The initial Test Parameter Setup screen
appears as follows:
When the parameters have been configured as desired and are
Parameter
Standard / Optional
Units of speed selection
Standard
Speed (same for both directions)
Standard
Password configuration
Standard
Programmable travel limits
Optional
Overload protection
Optional
PC control
Optional
Auto return
Optional
Cycling with dwell time
Optional
Independent up and down speeds
Optional
Programmable button configuration
Optional
U N I T S :
i n / m i n
E S C
>
N T R
E
_
< _
ESC
Exits Test Parameter Setup, reverts to Operating
Mode
< –
Scrolls to the previous parameter
– >
Scrolls to the next parameter
ENTR
Selects the parameter, allowing it to be modified
9
