User’s Guide
default lines, fields, and delimiter.
4. Click APPLY after making any changes in the
Gauge Port Settings
area.
3. Force gauge settings (refer to the gauge’s user’s guide)
1. Set to automatic output of every sample.
2. Disable Mitutoyo BCD output.
4. Test stand settings
1. Set the baud rate to 115,200.
2. Set the Control mode to Console.
5. The Gauge Settings tab and all other gauge-related functions
cannot be used while MESURgauge is connected to the ESM301. It
is intended for use only when connected to a Mark-10 force gauge
directly.
32