User’s Guide
9.2 Enabling Features
Features not originally purchased can be activated with an
authori-
zation code.
To activate the feature, scroll through the menu until
the desired feature is displayed, then press
ENTR
. If the feature is
already enabled (indicated by
on
), pressing
ENTR
has no effect. If
the feature is off, pressing
ENTR
will bring up a
request code
on the
display.
An example is shown below:
The
request code
must be supplied to Mark-10 or a distributor, who
will then provide a corresponding
authorization code
to activate the
feature.
The process for entering the
authorization code
is as follows:
1. The first digit of the
request code
will be flashing. Press
+
to increment the digit. Pressing
+
when the number 9
is displayed will return to 0.
2. Press
–>
to advance to subsequent digits, and change
them in the same fashion.
3. Press ENTR to enable the feature. If an incorrect code is
entered, the controller will return to the Feature Activa-
tion Setup menu, without enabling the feature. If this
happens the above process must be repeated.
KEYS:
0 1 3 9 0 2 7
ESC
ENTR
+
>
_
34
