Model ESM301 Programmable Force Test Stand
5.1 Speed, Up Speed, Down Speed (SPEED, UP SPEED, DN
SPEED)
If the independent up and down speed option has not been en-
abled, the up and down speeds will be the same, and is pro-
grammed in the
SPEED
parameter. If independent up and down
speeds are enabled,
UP SPEED
and
DN SPEED
parameters will
be present, and may be set individually.
Default setting: 10 in/min
Available settings: 0.02 – 45 in/min
5.2 Auto Return (AUTO RETURN)
With this feature, the crosshead moves to a limit switch, force set
point, or travel distance, whichever occurs first, and stops. Then,
the crosshead returns to the other limit and stops. The test speed is
dictated by the
SPEED
setting or the
UP SPEED
and
DN SPEED
settings. The return speed is always maximum speed.
Default setting: off
Available settings: off, on
UP SPEED:
1 0 . 7 3
ESC
ENTR
+
_
+
Increments the speed setting by .01 in or .5 mm. Hold-
ing down
+
will increment at an increasingly faster
rate.
–
Decrements the speed setting by .01 in or .5 mm.
Holding down
–
will decrement at an increasingly
faster rate.
ENTR
Returns to the Test Parameter Setup menu
ESC
Exits the parameter without saving changes
11
