3.2.10 Machine stop in safety conditions
•
Release the
control selector of the Control Box or release the button of the "TX MARCOLIN" radio remote control”.
•
Set the machine in EMERGENCY STOP by pressing the mushroom pushbutton stated as no.6 on the Control Box.
•
For setting the machine in SAFETY SHUTDOWN (if it is necessary to leave the vehicle unattended), remove the key
from the emergency pushbutton (no. 6).
3.2.11 Folding the Ecotype for uncovering the tipper body
In the starting operational situation, the covering is extended on the tipper body; proceed as follows to fold again the
covering:
•
Remove all elastic strings (if provided for the version installed on your vehicle) from the lateral hooking points so that the
covering can be moved freely.
•
Insert the key in the emergency pushbutton.
•
Turn the key in CLOCKWISE direction to unlock the emergency pushbutton for giving the consent to start the machine:
When activating the Control Box, it gives out an acoustic signal.
On remote control “TX MARCOLIN”
: PRESS the pushbutton no. 1 (UNCOVERED)
On Control Box
: TURN THE CONTROL SWITCH towards the left side (UNCOVERED)
•
Fold the tarpaulin completely and release the control switch or the control pushbutton. The Control Box is equipped with
an automatic motor shut-down when covering reaches the end stop.
•
Carry out a quick but attentive control to verify that everything is in good order before starting the tilting movement of the
tipper body.
3.2.12 How do you interrupt the machine operations?
Follow the process described in paragraph 3.2.7
3.2.13 How do you stop the machine in case of emergency?
Follow the process described in paragraph 3.2.8 .
3.2.14 Machine stop in safety conditions
Follow the process described in paragraph 3.2.10 .
3.2.15 In case of empty tipper body
When the tipper body is completely empty, two different behaviours of the operator are required:
•
If you have to reload the tipper body in the same place in which it was unloaded, it is possible to keep the elastic hooks
not hooked (always if your setup provides them), and then proceed with a new unfolding of the covering and their
relative fastening operation;
•
If you have to start travelling on the road with the empty tipper body, it is mandatory to position the elastic strings with
hooks in their specific anterior hooking points to prevent people or objects from getting snagged during road travel.
•
Push the emergency pushbutton to set machine in SAFETY SHUTDOWN and remove the key.
•
Carry out a brief but careful inspection to make sure that everything is in order before starting to drive the vehicle on the
road.
3.3 Using the accessory equipment (if installed)
3.3.1 Automatic rear closing device
The possible presence of the automatic rear closing device avoids that the operator has to arrange manually the end part of
the tarpaulin when securing the tipper body. With this device, the covering closes automatically when the covering reaches
the end stop.
