4.4.8 Check the contact plates (only if installed)
OPERATION
ORDINARY MAINTENANCE
EXTRAORDINARY MAINTENANCE
CHECK CONTACT PLATES
every fifteen days
Yearly c/o manufacturer or authorised workshop
•
Check the conservation status of the contact plates (if installed, only for motorized covering system),
and if necessary provide for their cleaning.
•
Protect the contacts using synthetic moisture-repellent grease.
4.4.9 Check the sliding paths of the covering
OPERATION
ORDINARY MAINTENANCE
EXTRAORDINARY MAINTENANCE
CHECK SLIDING CONDITIONS
monthly
Yearly c/o manufacturer or authorised
workshop
Check that the upper edges of the tipper body are free of damage and straight-line (absence of breaches on the locating
surface) so that the covering doesn’t hit upon any defects while sliding.
4.4.10 Check the pulleys
OPERATION
ORDINARY MAINTENANCE
EXTRAORDINARY MAINTENANCE
CHECK PULLEYS
monthly
Yearly c/o manufacturer or authorised
workshop
Check that the various pulleys, Ø60 and Ø100, are free of damage so that the covering can slide properly and regularly
without meeting any anomaly.
