Marathon Power TRTC-2002-N1, Installation, Operation And Maintenance Manual

Page: 74 / 92


HyperTerminal Set-Up
The following HyperTerminal setting is recommended for local or remote communication
between TRTC-2002-N1 & PC. For this tutorial, Com 1 is used. Verify the designation of
COM port, where RS232/USB cable to PC is connected such as COM1, COM2, etc.
Hyper Terminal Selection Screen
Step
1: The path is: Programs/Accessories/
Communications/HyperTerminal as shown.
Step 2:
Click on the
HyperTerminal
icon.
The
Connection Description
screen appears as
shown. Enter a name and icon for your unit
and click
OK.
Step 3
: The
Connect To
screen appears.
Select the COM port from the drop down menu
as shown that will be used.
Click OK.
Connection Description Screen
Connect To Screen
74