NAMES AND
FUNCTIONS
4
BASIC
CONNECTIONS
BASIC
OPERA
TION
ADV
ANCED
CONNECTIONS
SETUP
ADV
ANCED
OPERA
TION
TROUBLESHOOTING
OTHERS
NAMES AND
FUNCTIONS
NAMES AND FUNCTIONS
FRONT PANEL
q
w
!3
e
t y
!0 !1
r
u i o
!2
!4
!5
!6
!7
q
POWER ON/OFF button, STANDBY
indicator
Press the button to turn the power ON, and press
again to turn it OFF. If the POWER switch is in the
ON position, the power of this unit can be turned
ON/OFF by pressing the POWER button on the
remote controller.
When this unit is in the standby mode with the
POWER switch set to the ON position, pressing the
ENTER button also allows to turn the power on.
The STANDBY indicator lights up when this unit
is the standby mode (power OFF) by the remote
controller.
w
INPUT SELECTOR knob
This knob is used to select the input sources. (See
page 12)
e
SURROUND MODE button
Press this button to select the surround mode.
r
AUTO button
Press this button to select the AUTO mode from the
surround modes. When this mode is selected, the
unit determines the surround mode corresponding
to a digital input signal automatically.
t
S.DIRECT button
When this button is pressed, the audio signal will
bypass the tone control circuit to provide the pure
sound quality.
In the source direct mode, the tone control circuitry
and bass management are bypassed.
Notes
• The surround mode is automatically switched to
AUTO when the source direct function is turned
on.
• Additionally, speakers for which a “SMALL”
speaker con
fi
guration is chosen will be automatically
changed to “LARGE.”
y
DISPLAY button
Press this button to change the FL display mode.
(See page 19)
u
MENU button
Press this button to enter the SETUP MAIN
MENU.
i
EXIT button
Press this button to exit from the SETUP MAIN
MENU.
o
BAND button
Press this button to switch between FM and AM in
the TUNER mode.
!0
T.MODE button
Press this button to select the auto stereo mode or
mono mode when the FM band is selected.
(See page 13)
!1
MEMORY button
Press this button to enter the tuner preset memory
numbers or station names. (See page 20)
!2
CLEAR button
Press this button to cancel the station-memory
setting mode or preset scan tuning. (See page 21)
!3
VOLUME control knob
This knob is used to adjust the overall sound level.
Turning the control clockwise increases the sound
level. (See page 13)
!4
INFRARED receiving sensor area
This area receives infrared signals for the remote
control.
!5
Cursor (
1
,
2
,
3
,
4
) / ENTER button
Press these buttons to operate the SETUP MAIN
MENU and TUNER function.
!6
AUX INPUT jack
This auxiliary analog/audio input jacks accept the
connections of a MP-3 player, game etc.
!7
PHONES jack
This jack may be used to listen to the unit’s output
through a pair of headphones. Be certain that the
headphones have a standard 1 / 4” stereo phono
plug.
SR3053̲S̲01̲ENG.indd 4
SR3053̲S̲01̲ENG.indd 4
09.4.21 11:46:50 AM
09.4.21 11:46:50 AM
